Hands-on Experience of THERMO FITNESS TESTING Device Use for Thermoelectric Evaluation of Metallic Materials
https://doi.org/10.21122/2220-9506-2024-15-2-87-94
Abstract
The article describes experience of practical application of the differential thermoelectric tester "THERMO FITNESS TESTING". Description of the sensor design and results of differential thermoelectromotive force measurement for a large group of metals widely used in Russia are given. Usage of the "THERMO FITNESS TESTING" device to test the quality of R6M5 steel heat treatment is described. Dependence of thermoelectromotive force on the heating temperature which can be used for practical purposes was obtained. Usage the "THERMO FITNESS TESTING" to measure the thickness of a cemented (carburized) layer of 12KH2N4А steel is considered. Dependence of the thermoelectromotive force on the thickness of the cementation layer was also obtained.
About the Authors
A. A. Soldatov
National Researcher Tomsk Polytechnic University
Russian Federation
Russian Federation
Lenin Ave., 30, Tomsk 634050, Russia
A. I. Soldatov
National Researcher Tomsk Polytechnic University
Russian Federation
Russian Federation
Lenin Ave., 30, Tomsk 634050, Russia
M. A. Kostina
National Researcher Tomsk Polytechnic University
Russian Federation
Russian Federation
Address for correspondence:
Kostina M.A. –
National Researcher Tomsk Polytechnic University,
Lenin Ave., 30, Tomsk 634050, Russia
e-mail: mariyakostina91@mail.ru
A. A. Abouellail
Sphinx University
Egypt
Egypt
Regional Service Rd, New Asyut 71515, Egypt
References
1. Carreon H. Thermoelectric detection of spherical tin inclusions in copper by magnetic sensing. Journal of Applied Physics. 2000;88(11):6495. DOI: 10.1063/1.1322591
2. Carreon H. Thermoelectric Nondestructive Evaluation of Residual Stress in Shot-Peened Metals. Research in Nondestructive Evaluation. 2002;14(2):59−80. DOI: 10.1080/09349840209409705
3. Nagy PB. Non-destructive methods for materials' state awareness monitoring. Insight: Non-Destructive Testing and Condition Monitoring. 2010;52(2):61−71. DOI: 10.1784/insi.2010.52.2.61
4. Li JF. and et all. High-performance nanostructured thermoelectric materials. Npg Asia Mater. 2010;2(4): 152−158. DOI: 10.1038/asiamat.2010.138
5. Kikuchi M. Dental alloy sorting by the thermoelectric method. European Journal of Dentistry. 2010;4(1):66−70.
6. Dragunov VK, Goncharov AL. New approaches to the rational manufacturing of combined constructions by EBW. IOP Conference Series: Materials Science and Engineering. 2019;681:012010. DOI: 10.1088/1757-899X/681/1/012010
7. Goncharov A. [et al]. Research of thermoelectric effects and their influence on electron beam in the process of welding of dissimilar steels. IOP Conference Series: Materials Science and Engineering. 2020;759(1):012008, DOI: 10.1088/1757-899X/759/1/012008
8. Kharitonov IA, Rodyakina RV, Goncharov AL. Investigation of magnetic properties of various structural classes steels in weak magnetic fields characteristic for generation of thermoelectric currents in electron beam welding. Solid State Phenomena. 2020;299:1201–1207. DOI: 10.4028/www.scientific.net/SSP.299.1201
9. Carreon H, Medina A. Nondestructive characterization of the level of plastic deformation by thermoelectric power measurements in cold-rolled Ti–6Al–4V samples. Nondestructive Testing and Evaluation. 2007;299311. DOI: 10.1080/10589750701546960
10. Carreon H. Detection of fretting damage in aerospace materials by thermoelectric means. Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security. 2013;8694. DOI: 10.1117/12.2009448
11. Lakshminarayan B, Carreon H, Nagy P, Monitoring of the Level of Residual Stress in Surface Treated Specimens by a Noncontacting Thermoelectric Technique. AIP Conference Procciding. 2003;657:1523–1530. DOI: 10.1063/1.1570311
12. Carreon H. Evaluation of Thermoelectric Methods for the Detection of Fretting Damage in 7075‐T6 and Ti‐6A1‐4V Alloys. Characterization of Minerals, Metals, and Materials. 2015;435–442. DOI: 10.1007/978-3-319-48191-3_53
13. Carreon M, Barriuso S, Barrera G, Gonzálezcarrasco JL, Caballero F. Assessment of blasting induced effects on medical 316 LVM stainless steel by contacting and non-contacting thermoelectric power techniques. Surface and Coatings Technology. 2012;2942–2947. DOI: 10.1016/J.SURFCOAT.2011.12.026
14. Goncharov AL. Investigation of the thermal electromotive force of steels and alloys of different structural grades in electron beam welding. Welding International. 2011;25(9):703–709. DOI: 10.1080/09507116.2011.566744
15. Goncharov AL. [et al]. Investigation of thermoEMF temperature dependences for construction materials of various structural classes. IOP Conf. Series: Materials Science and Engineering. 2019;681:012017. DOI: 10.1088/1757-899X/681/1/012017
16. Li JF, Liu WS, Zhao LD, Zhou M. High-performance nanostructured thermoelectric materials. Npg Asia Mater. 2010;2(4):152–158. DOI: 10.1038/asiamat.2010.138
17. Ciylan B, Yılmaz S. Design of a thermoelectric module test system using a novel test method. International Journal of Thermal Sciences. 2007;46(7):717–725. DOI: 10.1016/j.ijthermalsci.2006.10.008
18. Soldatov AI. [et al]. Control system for device «thermotest». 2016 International Siberian Conference on Control and Communications (SIBCON). 2016;1-5. DOI: 10.1109/SIBCON.2016.7491869
19. Soldatov AA, Seleznev AI, Fiks II, Soldatov AI, Kröning KhM. Nondestructive proximate testing of plastic deformations by differential thermal EMF measurements. Russian Journal of Nondestructive Testing. 2012;48(3):184–186. DOI: 10.1134/S1061830912030060
20. Carreon H. Thermoelectric Detection of Fretting Damage in Aerospace Materials. Russian Journal of Nondestructive Testing. 2014;50(11):684−692. DOI: 10.1134/S1061830914110102
21. Soldatov AI, Soldatov AA, Kostina MA, Kozhemyak OA. Experimental studies of thermoelectric characteristics of plastically deformed steels ST3, 08KP and 12H18N10T. Key Engineering Materials. 2016;685:310−314. DOI: 10.4028/www.scientific.net/KEM.685.310
22. Soldatov AI, Soldatov AA, Sorokin PV, Abouellail AA, Obach II, Bortalevich VY, Shinyakov YA, Sukhorukov MP. An experimental setup for studying electric characteristics of thermocouples. SIBCON 2017 − Proceedings. 2017;79985342017. DOI: 10.1109/СИБКОН.2017.7998534
23. Xuan XC. [et al]. A general model for studying effects of interface layers on thermoelectric devices performance. International Journal of Heat and Mass Transfer. 2002;45(26):5159−5170. DOI: 10.1016/S0017-9310(02)00217-X
24. Burkov AT. [et al]. Methods and technique for thermopower and electrical conductivity measurements of thermoelectric materials at high temperatures. Scientific and technical bulletin of information technologies, mechanics and optics. 2015;15(2):173–195. (In Russ.) DOI: 10.17586/2226-1494-2015-15-2-173-195
Review
For citations:
Soldatov A.A., Soldatov A.I., Kostina M.A., Abouellail A.A. Hands-on Experience of THERMO FITNESS TESTING Device Use for Thermoelectric Evaluation of Metallic Materials. Devices and Methods of Measurements. 2024;15(2):87-94. https://doi.org/10.21122/2220-9506-2024-15-2-87-94
Views:
296
Email this article 