Operational Characteristics of Research and Test Benches and Installations with Heavy Liquid Metal Heat Carriers

The topic of research stands on heavy liquid metal coolants is currently undergoing a rebirth. Experimental stands have been built, for example, LILLA SCK CEN (Center for Nuclear Research in Belgium, Mol). This is one of the most famous stands that uses heavy liquid metal heat carriers. But a sufficiently complete description of the equipment line-up and the application of specific solutions for monitoring and maintaining the operability of the stands at the heavy liquid metal coolants is not published in the open press. Most likely, this is due to the specifics of research where there is a sufficient amount of secrecy. The aim of the work was to conduct a comprehensive review of various equipment use in this field. This will make it possible to plan more efficient composition of new research stands at heavy liquid metal coolants and avoid unnecessary mistakes when operating them. Heavy liquid metal heat carriers of nuclear power plants such as lead, eutectic lead-bismuth alloy, lead-lithium, gallium alloys differ significantly in their physicochemical properties from traditional and well-studied, widely used water, sodium, as well as liquid salt heat carriers, potassium, gases (helium, etc.).

1. Zrodnikov AV, Efanov AD, Orlov YuI, Martynov PN, Troyanov VM, Rusanov AE. Technology of heavy liquid metal heat carriers lead-bismuth and lead. Atomic energy. 2004;97(2):98-103.

2. Beznosov A.V., Bokova T.A., Bokov P.A. Horizontal steam generators for low and medium-powered reactor installations cooled with lead and lead-bismuth coolants. Steam Generators: Design, Types and Applications. 2017:1-134.

3. Rachkov V.I., Sorokin A.P., Zhukov A.V. Thermohydraulic studies of liquid metal heat carriers in nuclear power plants. Thermophysics of high temperatures. 2017;56(1):121-136. DOI: 10.7868/S0040364418010143

4. Drozdov YuN, Makarov VV, Puchkov VN. Justification of wear resistance of NPP equipment with liquid metal heat carriers. Tribology – mechanical engineering. Proceedings of the tenth anniversary All-Russian Scientific and Technical Conference with the participation of foreign specialists. 2014:40-41.

5. Gulevsky VA, Orlov YuI, Efanov AD, Martynov PN, Levchenko YuD, Ulyanov VV. Hydrodynamic problems of TMT technology in loop and monoblock structures. Issues of atomic science and technology. Series: Physics of Nuclear Reactors. 2008;4:15-33.

6. Legkih AYu, Skomorokhov AN, Sadovnichy RP. Uncertainty of oxygen solubility in liquid lead. Issues of atomic science and technology. Series: Nuclear reactor constants. 2019;3:252-260. DOI: 10.55176/2414-1038-2019-3-252-260

7. Kirillov PL (ed). Thermophysical properties of nuclear engineering materials. SSC RF FEI, Obninsk, 2005.

8. Levich VG. Physico-chemical hydrodynamics. 3rd ed. Izhevsk: Institute of Computer Research; 2016.

9. Bokova TA, Bokov PA, Volkov NS, Markov AR, Baranova LV. Experimental study of the state of the wall area in the annular gap in the system "rotating shaft – HLMC – bracket wall" Proceedings of the R.E. Alekseev NSTU. 2021;134(3):57-67. DOI: 10.46960/1816-210X_2021_3_57

10. Beznosov AV, Bokova TA, Makhov KA, Shumilkov AI, Albagachiev AY, Drozdov YN. Friction in the annular gaps between the control rods and housing of the brest reactor Russian Engineering Research. 2016;36(4):279-284. DOI: 10.3103/S1068798X16040031