Preview

Backscattering of Ultrasonic Waves as the Basis of the Method of Control of Structure and Physicо-Mechanical Properties of Cast Irons

https://doi.org/10.21122/2220-9506-2023-14-3-191-198

Abstract

Increasing the reliability of control of cast iron structure and its physical and mechanical characteristics is an important scientific and technical task of the machine-building industry. The paper studies the possibilities of controlling the structure of cast irons using structural noise created by ultrasonic scattering on graphite inclusions of different shapes. The subject of the present studies was such characteristics of structural noise as amplitude-temporal A(t) and as root mean square value of the amplitude of the ultrasonic waves backscattering field AN, compared with the data on ultrasonic velocity and strength or tensile strength of cast iron samples. As a result of the studies, a significant difference between the amplitude parameters of the AN structural noise obtained for samples with different shapes of graphite inclusions at 5 MHz was revealed for the first time. So, for example, for samples of gray cast iron (Russian: СЧ10, СЧ15, СЧ20, СЧ25), having predominantly plate-like form of graphite inclusions, the value of AN on 14–15 dB exceeds that measured in high-strength specimens of the cast iron with the prevailing form of spherical graphite inclusions ВЧ50 (Russian), etc. At the same time growth of longitudinal ultrasonic velocity amounted to 20–25 %. The method of rejection of gray cast iron from high-strength cast iron according to the data of amplitude parameters of structural noise AN at unilateral and local sounding of the object without using an additional reference signal reflected from its oppositional wall is suggested.

About the Authors

A. R. Baev
Institute of Applied Physics of the National Academy of Science of Belarus
Belarus

Akademicheskaya str., 16, Minsk 220072, Belarus



N. V. Levkovich
Belarusian State University
Belarus

Nezavisimosti Ave., 4, Minsk 220030, Belarus



E. P. Babuk
Minsk Automobile Plant
Belarus

Socialist str., 2, Minsk 220021, Belarus



M. V. Asadchaya
Institute of Applied Physics of the National Academy of Science of Belarus
Belarus

Akademicheskaya str., 16, Minsk 220072, Belarus



References

1. Ermolov IN, Lange YV. Nondestructive testing: handbook: in 8 vol. Vol. 3. Ultrasonic control. 2nd ed., revision. Moscow: Mashinostroenie. 2006. 864 p.

2. Busko VN, Vengrinovich VL, Chepyzhov BA. Non-destructive testing of cast iron products by the Barkhausen effect method. Non-destructive testing and diagnostics. 2010;(4):18-29. (In Russ.).

3. Sandomirsky SG. Peculiarities of links between the magnetic properties of cast irons with their structure and magnetic methods of control of cast iron castings (review). Casting and Metallurgy. 2016;4(85):96-10.

4. Orlowicz W, Tupaj M, Mróz M, Guzik E, Nykiel J, Zając A, Piotrowski B. Ultrasonic Assessment of Shape Index and Number of Graphite Precipitations in Spheroidal Cast Iron Manufactured in the Foundry METAL-ODLEW Sp. J., Archives of Foundry Engineering. 2009;9(4):179-182.

5. Baev AR, Mayorov AL, Konovalov GE. Ultrasonic inspection of objects with layered and heterogeneous structure. Science and Innovation. 2015;2(3):14-17.

6. Danilov V N, Voronkova LV. Investigation of possibilities of ultrasonic control of cast iron with lamellar graphite using standard direct transducers. Control. Diagnostics. 2020;1(23):4-12.

7. Baev AR, Asadchaya MV, Mayorov AL, Serge eva OS, Delenkovskiy NV. Possibilities of using amplitude-angle characteristics of surface and subsurface waves for control of materials with surface hardened inhomogeneous layer. Devices and Methods of Measurements. 2022;13(4):263-275. DOI: 10.21122/2220-9506-2022-13-4-263-275

8. Vadim N. Danilov, Liubov V. Voronkova. Attenuation of Ultrasonic Longitudinal Waves in Cast Iron with Flake Graphite on the Characteristics of Pulse Signals. Bulgarian Society for NDT International Journal “NDT Days”. 2019;2(3):167-181.

9. Nowacki K. Possibility of Determining Steel Grain Size Using Ultrasonic Waves, Metalurgija. 2009; 48(2):113-115.

10. Baqeri, R., Honarvar, F., Mehdizad, R., Case Depth Profile Measurement of Hardened Components using Ultrasonic Backscattering Metod, 18th World Conference on Nondestructive Testing Proceedings, pp. 16-20. April 2012, Durban, South Africa.

11. Muravyev VV, Muravyeva OV, Dedov AI, Baiteriakov AV. Control of structural state of steels by means of acoustic noise. Devices and methods of measurements. 2014;2(9):62-64.


Review

For citations:


Baev A.R., Levkovich N.V., Babuk E.P., Asadchaya M.V. Backscattering of Ultrasonic Waves as the Basis of the Method of Control of Structure and Physicо-Mechanical Properties of Cast Irons. Devices and Methods of Measurements. 2023;14(3):191-198. https://doi.org/10.21122/2220-9506-2023-14-3-191-198

Views: 231


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2220-9506 (Print)
ISSN 2414-0473 (Online)