Surface Electric Potential Measurement with a Static Probe

Surface electric potential measurements are widely used in non-destructive inspection and testing of precision surfaces, for example, in the production of semiconductor devices and integrated circuits. Features of the construction and application of devices for measuring the surface electric potential using an immovable reference electrode are considered. Despite the need to increase the area of the probe compared to devices with a vibrating probe, measurement techniques with an immovable probe have a number of advantages and could expand the scope of surface electric potential measurements in the inspection of samples with precise surfaces. Models of the formation of a measuring signal in the presence of a spatial inhomogeneity of surface electric potential are presented and discussed.

1. Kronik L., Shapira Y. Surface photovoltage phenomena: theory, experiment, and applications. Surface Science Reports, 1999, vol. 37, iss. 1–5, pp. 1–206. DOI: 10.1016/S0167-5729(99)00002-3

2. Noras A. Non-contact surface charge/voltage measurements. Capacitive probe-principle of operation. Trek, 2002, no. 3001, pp. 1–8.

3. Zharin A. Method of contact potential difference and its application in tribology. Minsk: Bestprint Publ., 1996, 240 p. DOI: 10.13140/RG.2.1.3993.8645

4. Morrison S. Chemical physics of solid state surface. Moscow: Мir Publ., 1980, 488 p.

5. Pantsialeyeu K.U., Mikitsevich U.A., Zharin A.L. Design of the contact potentials difference probes. Devices and Methods of Measurements, 2016, vol. 7, no. 1, pp. 7–15 (in Russian). DOI: 10.21122/2220-9506-2016-7-1-7-15

6. Zharin Anatoly, Pantsialeyeu K., Svistun A., Tyavlovsky K. Determining the lifetime of minority charge carriers and iron impurity concentration in semiconductor structures with submicron layers. Euroasian Journal of Semiconductors Science and Engineering, 2020, vol. 2, iss. 4, Article 3, pp. 17–21.

7. Polyakov V.V. Kontaktnaya skaniruyushchaya emkostnaya mikroskopiya bolsherazmernyh obrazcov [Application of Scanning Capatitance Microscopy to Large-Scale Samples]. Nauchnoe priborostroenie [Scientific Instrumentation Engineering], 2009, vol. 19, no. 3, pp. 62–66 (in Russian).

8. Kronik L., Shapira Y. Surface Photovoltage Spectroscopy of Semiconductors. Encyclopedia of Modern Optics, 2005, pp. 36–43. DOI: 10.1016/B0-12-369395-0/00631-X

9. SHtrapenin G. Sovremennye operacionnye usiliteli firmy National Semiconductor [Modern operational amplifiers by National Semiconductor]. Komponenty i tekhnologii [Components and technologies], 2005, no. 7, pp. 46–51 (in Russian).

10. Craig A., Radeka E. Issledovanie zavisimosti KRP metallov ot mehanicheskogo napryazhenija metodom Kelvina [Study of CPD vs mechanical tension dependence of metals by Kelvin probe technique]. Pribory dlya nauchnyh issledovanij [Instrumentation for Scientific Research], 1970, no. 2, pp. 99–105 (in Russian).

11. Delchar T., Eberhagen A., Tompkins F.C. A static capacitor method for the measurement of surface potential of gases on evaporated metal films. J. of Scientific Instr., 1963, vol. 40, no. 3, pp. 105–109. DOI: 10.1088/0950-7671/40/3/308

12. Jacobs J.C., Buuron A.J.M., Renders P.J.M., Snik A.F.M. Surface potential measurements of insoluble monolayers using the static-capacitor method. Journal of Colloid and Interface Science, 1981, vol. 84, pp. 270–271. DOI: 10.1016/0021-9797(81)90285-X

13. Mizse J. Surface potential mapping: comparison of the vibrating capacitor and the SPV method. Solid-State Electronics, 2000, vol. 44, iss. 1, pp. 509–513. DOI: 10.1016/S0038-1101(99)00264-6

14. Ferrari G., Gozzini F., Molari A., Samprietro M. Transimpedance amplifier for high sensitivity current measerements оn nanodevices. IEEE Journal of SolidState Circuits, 2009, vol. 44, no. 5, pp. 1609–1616. DOI: 10.1109/JSSC.2009.2016998

15. Woodall I.M., Frecouf I.L. Summary Abstract: Are they really Schottky barriers after all? J. Vac. Sci. Technol., 1982, vol. 21, no. 2, pp. 574–576. DOI: 10.1116/1.571766

16. Baytekin H.T., Patashinski A.Z., Branicki M., Baytekin B., Soh S., Grzybowski B.A. The Mosaic of Surface Charge in Contact Electrification. Science, 2011, ol. 333, iss. 6040, pp. 308–312. DOI: 10.1126/science.1201512

17. Yamasue Kohei, Yasuo Cho. Surface Potential Fluctuations of SiO2 /SiC Interfaces Investigated by Local Capacitance-Voltage Profiling Based on Time-Resolved Scanning Nonlinear Dielectric Microscop. Materials Science Forum. Silicon Carbide and Related Materials, 2021, vol. 1062, pp. 335–340. DOI: 10.4028/p-2t7zak

18. Glatzel Th. Kelvin probe force microscopy оn III-V semiconductors: the effect of surface defects оn the local work function. Materials Science аnd Engineering, 2003, vol. 102, iss. 1–3, pp. 138–142. DOI: 10.1016/S0921-5107(03)00020-5

19. Torkhov N.A., Novikov V.A. Fraktalnaya geometrija poverhnostnogo potenciala electrohimicheski osazhdennyh ple-nok platiny i palladija [Fractal geometry of surface potential of electrochemically deposited platinum and palla-dium films]. Fizika i tekhnika poluprovodnikov [Physics and technology of semiconductors], 2009, vol. 43, iss. 8, pp. 1109–1116 (in Russian).

20. Tyavlovsky K.L., Tyavlovsky A.K., Vorobei R.I., Gusev O.K., Svistun A.I., Ananchikov I.A. Mnogoparametricheskie izmerenija elektricheskogo potenciala poverhnosti s ispol’zovaniem adaptivnoy odnosignal’noy modeli [Multi-parameter measurements of surface electrical potential with the use of adaptive one-signal model]. Metrologiya i priborostroenije [Metrology and Instrumentation], 2008, no. 2, pp. 27–32 (in Russian).

21. Tyavlovsky K.L., Gusev O.K., Vorobei R.I. Metrologicheskoe obespechenie beskontaktnyh izmereniy parametrov mikroneodnorodnogo raspredelenija elektricheskogo potenciala poverhnosti [Metrological assurance of measurements of micro-nonhomogeneous distribution of surface electrical potential]. Pribory i sistemy. Upravlenie, control’, diagnostika [Devices and Systems. Control, Monitoring, Diagnostics], 2009, no. 4, pp. 34–37 (in Russian).