Application of Two-Channel Principle in Measuring Devices to Compensate for Disturbing Influences of Unknown Physical Nature
https://doi.org/10.21122/2220-9506-2020-11-3-228-235
Abstract
The article notes the advantages of the method of constructing absolutely invariant measuring transducers for working in conditions with disturbing influences. However, this method is not universal. Its limitations are due to the impossibility of "symmetric" transmission of all disturbing influences into parallel measuring channels. A broader interpretation of the two-channel principle is proposed to overcome these limitations. The aim of the study was to substantiate and implement a method for constructing quasi-invariant measuring transducers and systems that retain their metrological characteristics under external disturbances of unknown physical nature.
The theory that develops the two-channel principle to a full-fledged technological method is presented in the article. The theory includes the necessary and sufficient conditions for physical feasibility this method. Two fundamental tasks have been solved in the work. The first task is to identify signs that reflect the essence of the technological method in to specific cases and the second is to implement a methodology that allows these signs to be effectively applied in practice.
In the examples, a complex of technologies is defined for groups of elements of quasi-invariant transducers that provide compensation of the influencing factors acting on them with acceptable accuracy.
There are significant advantages in discussed method. It gives hope for acceptable measurement results under conditions when character and even physical principle of influencing a priori are unknown.
About the Authors
V. N. Nesterov
JCS Samara Electromechanical Plant;
Samara National Research University;
Povolzhskiy State University of Telecommunications and Informatics
Russian Federation
Russian Federation
Address for correspondence: V.N. Nesterov – Samara National Research University, Moskovskoe highway, 34А, Samara 443086, Russia
e-mail: nesterov.ntc@yandex.ru
A. R. Li
JCS Samara Electromechanical Plant
Russian Federation
Stepan Razin str., 16, Samara 443099
Russian Federation
Stepan Razin str., 16, Samara 443099
References
1. Bondarenko L.N., Nefediev D.I. [Analysis of test methods to improve measurement accuracy]. Izmerenie. Monitoring. Upravlenie. Kontrol'. [Measurement. Monitoring. Management. Control], 2014, no. 1(7), pp. 15–20 (in Russian).
2. Blockin-Mechtalin Yu.K. [Methods and instruments to improve the accuracy of measuring transducers and systems for experimental aerodynamics]. Datchiki i sistemy [Sensors and systems], 2011, no. 7, pp. 8–18 (in Russian).
3. Cooper V.Ya., Rubtsov M.G. [Algorithmic methods for increasing measurement accuracy based on inverse interpolation models]. Vestnik Samarskogo gosudarstvennogo tekhnicheskogo universiteta. Seriya "Tekhnicheskie nauki" [Bulletin of Samara State Technical University. Technical Sciences Series], 2010, no. 3(28), pp. 67–72 (in Russian).
4. Ashanin V.N., Larkin S.E., Regeda O.N. [Error correction of measuring circuits of parametric sensors]. Izmerenie. Monitoring. Upravlenie. Kontrol'. [Measurement. Monitoring. Management. Control], 2016, no. 2(16), pp. 103–109 (in Russian).
5. Chekushkin V.V., Bulkin V.V. [Improving the accuracy of measuring systems with unstable parameters]. Izmeritel'naya tekhnika [Measurement Techniques], 2006, no. 1, pp. 7–11 (in Russian).
6. Ivakhnenko A.G. [The connection between the theory of invariance and the theory of stability of measuring systems]. Avtomatika [Automation], 1960, no. 5, pp. 35–40 (in Russian).
7. Petrov B.N., Viktorov V.A., Lunkin B.V., Sovlukov A.S. Princip invariantnosti v izmeritel'noj tekhnike [The principle of invariance in measurement technology]. Moscow, Nauka Publ., 1976, 244 p.
8. Nesterov V.N., Lee A.R. [The theory and practice of designing of invariant measurement transducers and systems based on the two-channel principle]. Izvestiya Samarskogo nauchnogo centra Rossijskoj akademii nauk [Bulletin of the Samara Scientific Center of the Russian Academy of Sciences], 2016, vol. 18, no. 4(7), pp. 1414– 1422 (in Russian).
9. Svistunov B.L. [Measuring transducers for parametric sensors using analytical redundancy]. Izmerenie. Monitoring. Upravlenie. Kontrol'. [Measurement. Monitoring. Management. Control], 2017, no. 2(20), pp. 94–100 (in Russian).
10. Chernetsov M.V., Churakov P.P. [Invariant transformation in measuring systems with parametric sensors]. Izmerenie. Monitoring. Upravlenie. Kontrol'. [Measurement. Monitoring. Management. Control], 2018, no. 1(23), pp. 11–17 (in Russian).
11. Keil Stefan. Technology and practical use of strain gages: with particular consideration of stress analysis using strain. Dual-channel principle, Berlin, Wiley. Ernst, Wilhelm & Sohn (Verlag), 2017, pp. 197–200.
12. Nesterov V.N. [New class of invariant transducers: construction methods and implementation for special purpose instruments and systems]. Informacionnye, izmeritel'nye i upravlyayushchie sistemy. Nauchno-tekhnicheskij sbornik Samarskogo otdeleniya Povolzhskogo centra Metrologicheskoj akademii Rossii [Information, measuring and control systems. Scientific and technical collection of the Samara branch of the Volga center of the Metrological Academy of Russia], ed. V.N. Nesterov, Samara, Samara Scientific Center of the Russian Academy of Sciences Publ., 2007, no. 3, pp. 18–37 (in Russian).
13. Nesterov V.N., Mukhin V.M. IIzmeritel'nyj preobrazovatel' [Measuring transducer]. Patent RF, no. 2297638. 2005.
Review
For citations:
Nesterov V.N., Li A.R. Application of Two-Channel Principle in Measuring Devices to Compensate for Disturbing Influences of Unknown Physical Nature. Devices and Methods of Measurements. 2020;11(3):228-235. https://doi.org/10.21122/2220-9506-2020-11-3-228-235
Views:
1641
Email this article 