METROLOGICAL MAINTENANCE OF MEASUREMENT OF THERMAL CONDUCTIVITY PARAMETERS
Abstract
A two-stage method of intralaboratory research of characteristics of accuracy of the method of measurement of thermal conductivity was developed and implemented. The criterion determining the necessity of performing the second stage of research was formulated. The technique allows to identify sources influenced on the result of measurement of thermal conductivity, and also to control characteristics of the method (precision). Recommendations for research of the National reference unit of thermal conductivity were developed.
About the Authors
N. A. Zhagora
Белорусский государственный институт метрологии, г. Минск
Belarus
Belarus
P. S. Serenkov
Белорусский национальный технический университет
Belarus
Belarus
O. V. Fufaeva
Белорусский национальный технический университет
Belarus
Belarus
References
1. СТБ ИСО 5725-2002. Точность (правильность и прецизионность) методов и результатов измерений. Части 1-6. – Введ. 09.12.2002. – № 54. – Минск : Госстандарт РБ.
2. Measurement Systems Analysis Reference Manual. – Daimler Chrysler Corporation, Ford Motor company, General Motors Corporation, 2002. – 217 р.
3. СТБ ISO/TS 16949-2010. Системы менеджмента качества. Особые требования по применению СТБ ISO 9001-2009 для организаций, производящих составные и запасные части, используемые в автомобилестроении. – Введ.01.01.2011. № 36. – Минск : Госстандарт РБ.
4. Zarr, R. Robert. Assesment of uncertainties for the NIST 1016 mm Guarded-Hot-Plate apparatus: extended analysis for low-density fibrous-glass thermal insulation / Robert R. Zarr // Journal of research of the national institute of standards and technology. – 2010. – № 1. – С. 32–44.
Review
For citations:
Zhagora N.A., Serenkov P.S., Fufaeva O.V. METROLOGICAL MAINTENANCE OF MEASUREMENT OF THERMAL CONDUCTIVITY PARAMETERS. Devices and Methods of Measurements. 2013;(1):108-114. (In Russ.)
Views:
1392
Email this article 