APPLICATION OF THE SPECTRUM ANALYSIS WITH USING BERG METHOD TO DEVELOPED SPECIAL SOFTWARE TOOLS FOR OPTICAL VIBRATION DIAGNOSTICS SYSTEM
https://doi.org/10.21122/2220-9506-2016-7-2-186-194
Abstract
The objective of this paper is development and experimental verification special software of spectral analysis. Spectral analysis use of controlled vibrations objects. Spectral analysis of vibration based on use maximum-entropy autoregressive method of spectral analysis by the Berg algorithm. For measured signals use preliminary analysis based on regression analysis. This analysis of the signal enables to eliminate uninformative parameters such as – the noise and the trend. For preliminary analysis developed special software tools. Non-contact measurement of mechanical vibrations parameters rotating diffusely-reflecting surfaces used in circumstances where the use of contact sensors difficult or impossible for a number of reasons, including lack of access to the object, the small size of the controlled area controlled portion has a high temperature or is affected by strong electromagnetic fields. For control use offered laser measuring system. This measuring system overcomes the shortcomings interference or Doppler optical measuring systems. Such as measure the large amplitude and inharmonious vibration. On the basis of the proposed methods developed special software tools for use measuring laser system. LabVIEW using for developed special software. Experimental research of the proposed method of vibration signals processing is checked in the analysis of the diagnostic information obtained by measuring the vibration system grinding diamond wheel cold solid tungsten-containing alloy TK8. A result of work special software tools was complex spectrum obtained «purified» from non-informative parameters. Spectrum of the signal corresponding to the vibration process observed object.
About the Authors
E. O. ZaitsevUkraine
V. E. Sydorchuk
Ukraine
Address for correspondence: Sydorchuk V.E. – Kiev National University of Trade and Economics, Kyoto str., 19, 02156, Kiev, Ukraine e-mail: sudorchyk@ipnet.ua
A. N. Shpilka
Ukraine
References
1. Zaitsev E.O., Lisogor M.V. [Application of the method by Berg for the analysis of vibration signals which were obtained using laser sensors]. Electronics and communications, 2014, vol. 19, no. 6 (83), pp. 66–72 (in Ukrainian).
2. Zvaritch V.N., Martchenko B.G. [Autoregressive linear processes with periodic structures as models of information signals]. Proceedings of the universities. Radioelectronics, 2011, no. 7, pp. 25–30 (in Russian).
3. Zvaritch V., Martchenko B. [Linear processes of autoregressive in problems vibrodiagnostics nodes electric cars]. Technical diagnostics and nondestructive testing, 1996, no. 1, pp. 45–54 (in Russian).
4. Martchenko B., Mislovitch M. Vibrodiagnostika podshipnikovykh uzlov elektricheskikh mashin [Vibration diagnostics of bearing assemblies of electrical machines]. Kiev, Naukova Dumka Publ., 1992, 196 p. (in Russian).
5. Zastrogin, Yu.F. Lazernye pribory vibracionnogo kontrolya i tochnogo pozicionirovaniya [Laser Devices of vibration control and accurate positioning]. Moscow, Mashinostroeniye Publ., 1995, 315 p. (in Russian).
6. Zander F.V. Algorithms for the Optimum Estimation of the Parameters of a Radio Signal in a Measurement Time of Less Than a Period and a Nonmultiple of a Period in Which the Result Is Tied to the Beginning of the Measurement Interval. Мeasurement Techniques, 2003, vol. 46, Issue 2, pp. 172–176.
7. Brahynets I.A., Zaitsev E.A. [Laser Sensors phase displacements and vibrations in the frequency range 15 to 1000]. Technical Electrodynamics. Special issue, 2010, vol. 2, no. 3, pp. 186–191 (in Russian).
8. Brahynets I. A., Zaitsev E. A. [Noise resistance of phase laser vibration sensors]. Technical Electrodynamics, 2010, no. 3, pp. 67–73 (in Russian).
9. Marple S.L. Cifrovoj spektral’nyj analiz i ego prilozheniya [Digital spectral analysis with applications]. Moscow, Mir Publ., 1990, 584 p. (in Russian).
10. Mulgrew B. Digital signal processing: concepts and applications. New York, McMillan Press Ltd., 1999, 408 p.
11. Tad J. Ulrych, Thomas N. Bishop. Maximum entropy spectral analysis and autoregressive decomposition. Reviews of Geophysics, 1975, no. 1(13), pp. 183–200.
12. Srbulov M. Ground Vibration Engineering: Simplified Analyses with Case Studies and Examples. Netherlands., Springer Publ., 2010, 233 p.
13. Otnes R., Enokson L. Prikladnoj analiz vremennykh ryadov. Prikladnye metody [Applied time series analysis. Basic methods]. Moscow, Mir Publ., 1982, 429 p. (in Russian).
14. Popov Yu.V. [On the selection of the periodic components of a time series index of the number of accidents]. Problems of aviation safety, 2008, no. 8, pp. 10–17 (in Russian).
15. Anderson T.W. The Statistical Analysis of Time Series. New York, Wiley-Interscience Publ., 1994, 720 р.
16. Travis J., Kring J. LabVIEW for Everyone: Graphical Programming Made Easy and Fun. Third Edition. Crawfordsville, Prentice Hall, 2007, 1236 p.
Review
For citations:
Zaitsev E.O., Sydorchuk V.E., Shpilka A.N. APPLICATION OF THE SPECTRUM ANALYSIS WITH USING BERG METHOD TO DEVELOPED SPECIAL SOFTWARE TOOLS FOR OPTICAL VIBRATION DIAGNOSTICS SYSTEM. Devices and Methods of Measurements. 2016;7(2):186-194. (In Russ.) https://doi.org/10.21122/2220-9506-2016-7-2-186-194